Assistant Chief Engineer (Second Class Power Plant Engineer) - Framingham State University

The basic purpose of this work is to ensure that assigned steam boiler plant facility is operated and maintained safely and efficiently.

Please review the Power Plant Engineer Series

SUPERVISION RECEIVED:

Under general supervision of the Director of Boiler Plant and Utility Operations, or designee.

SUPERVISION EXERCISED:

This position may exercise direct supervision (i.e., not through an intermediate supervisor) over, assign work to and review the performance of 1 - 5 personnel; indirect supervision (i.e., through an intermediate supervisor) over 6 - 15 personnel; and functional supervision (i.e., over certain functions, but not over all daily work activities, or over all daily work activities on a temporary basis) over 6 - 15 personnel.

EXAMPLES OF SPECIFIC DUTIES AND RESPONSIBILITIES:

• Checks, inspects and monitors various types of machinery, equipment and systems such as steam traps, heat control panels, safety valves and gauges, high and low water converters and/or steam reducing stations, gas systems, fire alarms, fire sprinklers and fire hydrant systems, standpipes, hot water preheat or oil jackets; various types of generators such as diesel, steam and turbine; various types of pumps and water pumping stations; pneumatic temperature and pressure control systems; electrical systems; steam and water lines and systems; refrigeration systems; air conditioning and ventilating systems; and motor bearings, boiler fires, air compressors, smoke stack emissions, coiling oil tanks and chemical tank levels, etc., to ensure that assigned plant facility is operated in a safe, efficient and pollution-free manner.
• Operates machinery and equipment such as chillers, boilers, generators, pumps and valves to ensure the provision of power.
• Repairs, overhauls and maintains machinery and equipment by replacing turbines, boilers, burners, motors, pumps and compressors; by using metal laths, electric hacksaws, pipe threaders and other machine shop equipment; by turning over auxiliary equipment as needed; by repairing and overhauling pipes, valves, gauges, etc.; by cleaning or replacing filters; by lubricating equipment; and by making minor electrical or plumbing repairs to keep equipment operating efficiently and to prevent breakdowns.
• Cleans and maintains work areas and plant machinery and equipment, such as suction and discharge oil strainers, burners, boilers and pumps to ensure the safety and efficiency of plant operations.
• Responds to emergencies and breakdowns by evaluating equipment or system problems; by identifying problems with systems covered under service contract and informing the appropriate contractor; by determining that repairs are necessary and taking corrective action; by deciding when to shut down equipment or systems; by transferring from automatic to manual operation; and by operating the power plant by total steam when other systems fail to ensure uninterrupted service.

WORKING CONDITIONS:

Work under exposure to the hazards of gases or noxious fumes, high pressure boilers, steamlines, caustic or inflammatory chemicals and high voltage; are exposed to intense heat and excessive noise; lift heavy objects; work varies shifts, weekends, holidays and nights; are subject to standby (on-call) work status; may work under exposure to the harmful effects of coal dust, asbestos or inadequate ventilation; and may work in a penal institution.

MINIMUM QUALIFICATIONS:

• Knowledge of the principles of operation of industrial type heating systems.
• Knowledge of the types and uses of industrial type heating systems.
• Knowledge of the principles of pneumatics as applied to heating, ventilating and air conditioning systems.
• Knowledge of the types and uses of pneumatic controls used in power plant operations.
• Knowledge of calibration and/or adjustment techniques as applied to pneumatic control systems.
• Knowledge of the fundamentals of electrical practice.
• Knowledge of the types and uses of precision measuring equipment used in a power plant such as manometers, voltmeters, anemoneters, tachometers, etc.
• Possession of a Second Class or higher Stationary Engineer's license based on the standards established by the Massachusetts Department of Public Safety and pursuant to Chapter 146 of the Massachusetts General Laws.

This is a full-time, non-exempt, benefits-eligible position in the American Federation of State, County, and Municipal Employees (AFSCME) bargaining unit with a union title of Second Class Power Plant Engineer. This is grade 19, step 12. This is a base annual salary of $94,148.60.

Framingham State University conducts criminal history and sexual offender record checks on recommended finalists prior to final employment for all positions.

Framingham State University is an equal opportunity employer. The University considers all qualified candidates without regard to race, color, sex, age, national origin, disability status, Veteran status, gender identity, gender expression, sexual orientation, genetic information, or any other characteristics protected by law.

Members of underrepresented or minoritized groups, women, veterans, persons with disabilities, and all persons committed to equity, diversity, and inclusive excellence are strongly encouraged to apply.

PI287212778